material - 楷伸科技-3D列印

Material Introduction

Material name	9400 Resin material	translucent resin material	Highly resilient resin material	Matt black resin material	Gray high temperature resin material	black nylon material PA12	White nylon material	red wax	Stainless steel	Aluminum alloy
heat distortion temperature	40~50 °C	40~50 °C	40~50 °C	40~50 °C	80~100 °C	120~150 °C	120~150 °C	50~50 °C	density 8	density 2.7
min wall thickness	0.6mm	0.6mm	0.6mm	0.6mm	0.6mm	0.5mm	0.5mm	0.5mm	0.5mm	0.5mm
Minimum hole diameter	1mm	1mm	1mm	1mm	1mm	1.2mm	1.2mm	0.8mm	0.8mm	0.8mm
Material Hardness(Shore D)	79	87	85	80	85	86	75	79	158HB	120HB
Tensile Strength (stretch)	47Mpa	50Mpa	38~56Mpa	48Mpa	40~44Mpa	50Mpa	52Mpa	47Mpa	560Mpa	330Mpa
Tensile Strength (fracture)	33~40Mpa	56Mpa	60Mpa	56Mpa	52Mpa	70Mpa	52Mpa	30~40Mpa	10~12%	0.06
Bending Strength	67Mpa	84Mpa	69~74Mpa	68Mpa	64~69Mpa	75~80Mpa	52Mpa	67Mpa	480Mpa	245Mpa
Bending Modulus	2178~2222Mpa	2490Mpa	2692~2775Mpa	2300Mpa	2900~3200Mpa	2800Mpa	1500mpa ISO178	Mpa	180GPa	70GPa
Print layer height	0.1mm/0.05mm	0.1mm	0.1mm	0.1mm	0.1mm	0.08mm	0.08mm	0.02mm
Printing Error Rate	1%~3%	1%~3%	1%~3%	1%~3%	1%~3%	2.5%	2.5%	0.001	0.1%~0.2%	0.1%~0.2%
Surface layer	smoothing	thick bottom	smoothing	thick bottom	smoothing	Rough	Rough	fine smooth	Natural pitting	Natural pitting